Maxx Model CNC Hopup Chamber for ASG Scorpion EVO-3

1049,00 kr

Normal leveranstid: 1-3 arbetsdagar

1 i lager

Artikelnr: 731 Kategori: Etiketter: , , ,
Dela gärna!

Beskrivning

The CNC Aluminum Hopup Chamber EVO unit is precisely machined to perform accurately and consistently on the ASG CZ Scorpion EVO-3 Airsoft Rifles. The Hopup Chamber EVO unit is built with a Precision Aluminum Rotary Dial Knob for fine Hopup adjustments and equipped with 4mm Flat Soft Bucking Nub (6mm Bucking Nub is optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot. The Hopup Chamber EVO unit is designed to accept the 18.5mm nozzle length and is fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use. The Hopup Chamber EVO unit is wisely built with a self-centering inlet to ensure the Hopup unit is inserted exactly in the center of the 11.5mm inner bore ASG EVO-3 gearbox outlet without wobbling. Also included is an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting.

***The Dual UV LED Tracer Module is an add-on option to glow BB in the dark. Operating Voltage from 7VDC – 15VDC (2-4 cells LiPo, 6-13 cells NiCad). (Sold separately)
***Test results: FPS might be increased from 10FPS to 30FPS over the stock setup. Please check your FPS!

Includes

Compatibility
ASG 2018 CZ Scorpion EVO-3 AEG
ASG 2018 CZ Scorpion EVO-3 HPA

1 x CNC Aluminum Hopup Chamber EVO unit
2 x Strong Clear Vinyl Cover set
1 x CNC Aluminum Soft Round Nub
1 x CNC Aluminum Soft Flat Nub (4mm) (Pre-installed)
2 x Steel Nub Spring
1 x Steel Compression Spring
1 x Brass Dial Bushing
1 x Dial O-ring
1 x CNC Precision Aluminum Rotary Dial Knob
1 x CNC Delrin Locking C-Clip
1 x CNC Brass Barrel Spacer
1 x Brass Barrel Spacer Holder O-ring

Overall Length: 47mm
Overall Height: 26.25mm
Inlet Diameter: 11.5mm
Hub Outer Diameter (to fit into Outer Barrel): 12mm
Hub Inner Diameter (to fit Nozzle): 7mm
Material: Brass/Aluminum 6061

Recensioner

Det finns inga recensioner än.

Bli först med att recensera ”Maxx Model CNC Hopup Chamber for ASG Scorpion EVO-3”

Maxx Model CNC Hopup Chamber for ASG Scorpion EVO-3
Maxx Model CNC Hopup Chamber for ASG Scorpion EVO-3
1049,00 kr
Välj valuta
SEK Svenska kronor
EUR Euro