T238 V2.0 optical bluetooth mosfet for V2 gearbox

Description

INSTALL T238 V2

The V2.0 for V2 Bluetooth version gearbox is a multifunctional MOSFET switch that can be programmed by a smartphone via Bluetooth.

Adopts a high-speed processor, 8 optical sensors, and 2 high-power MOSFET chips.
Designed for AIRSOFT, Gel Ball Blaster, and other V2 gearboxes with semi-automatic and fully automatic functions.
Features:

Supports up to 14.8V battery.
Bluetooth module: Integrated Bluetooth wireless communication module, use a smartphone to programme through Bluetooth, can download Android / IOS free APP.
Binary trigger: Putting the selector in a semi-auto position, and pulling and holding the trigger for 3 seconds will change the semi-auto function into binary trigger shooting mode.
The auto-loading function is designed for gel ball blaster magazines with a motor inside, when changing the magazine, the magazine motor will run automatically for 0.5 seconds.
PRE-COCKING.The default position of the piston is adjustable in the semi-auto model. Per-cocking function can be implemented, zero trigger delay.
ETU overheat protection. When the DTU is overheated, after the trigger is pulled, the motor will give a beep prompt until it is automatically restarted after cooling.
Low battery voltage protection： the default setting is a 7.4V battery. Change the battery when hearing ' beep， beep， beep，beep，beep'4 times low voltage warning sound.
Active braking. The energy that supports the active brake function comes from the inertia of the motor, and stops the piston without delay. The effect of active brake is significant on high torque motors.
Fast speed of response. This module is powered by a small current， the current flows through the MOSFET directly to the motor， providing a higher current to increase the rate of fire and speed of response.
Block-up protection. When gearbox lock-up occurs, the system stops working and emits an elongated 'beep' sound. Please check the wave box immediately by powering it off.
Multiple shooting modes. The system includes multiple shooting modes, those modes can be selected by a fire select switch.
Gearbox protection. The active brake prevents the over-spin of gears, this solves the issue that a single shot changes to multiple shots under high voltage. meanwhile, the spring is fully released in the semi-auto model and parts in the gearbox are not under strain, increasing the life cycle of your gearbox.
Modes:

Safe - This mode is completely the same as the original safe mode. The trigger can be pulled but nothing happens. The default mode is safe, however, this mode can be programmed to semi-auto, double stroke single shot, 3-round burst to 6-round burst.
Semi - The default mode is semi, however, this mode can be programmed to semi-auto, double stroke single shot, 3-round burst to 6-round burst.
Auto - The default mode is full-auto, however, this mode can be programmed to full-auto, 3-round burst, 6-round burst, or 9-round burst.
Package Content:

Digital trigger unit V2.0 X1
Manual X1
Badge X1
Small bag accessories X1
Insulation sticker X1